
Automatic gate installation and repair
We build new automatic gates and automate existing ones, with the operator, safety devices and controls installed as one system, so it opens on command and stops when it should.
- New automated gates and manual-gate conversions
- Swing, slide and cantilever operators
- Repairs on most major brands
Get a free quote
Tell us about your project. We'll call you back to set up a free on-site consultation.
Smooth operation, lasting strength
An automatic gate is three things working together: a gate that moves freely, an operator that's sized for it, and the controls and safety devices that tell it when to move and when to stop. When one of those is off, the whole system suffers.
We install all three, using quality materials and precise workmanship, and test the full cycle before we leave. Already have a manual gate? We'll check whether it can be automated as it is or needs hinges, rollers or posts upgraded first.

Ornamental steel gates opening onto a carport
Filmed on a BayView job in the South Bay, straight from the phone of the crew that installed it.
Automation for any gate type
We match the operator to the gate, not the other way around.
Swing gates
Arm, linear or underground operators, single or dual leaf, with synchronized opening.
Sliding gates
Pad-mounted slide operators with chain or rack drive, sized for the gate's weight.
Cantilever gates
Trackless sliding gates for slopes, gravel and high-traffic sites.
Manual gate conversions
We reinforce and rehang existing gates so an operator can move them safely.
Solar-powered gates
Where running power is costly, a solar panel and battery run a DC operator.
Pedestrian gates
Electric strikes, maglocks and closers for walk-through gates.
Every automatic gate we install has
A written, itemized quote before any work starts, and a warranty on labor and materials after.
Get a Free Quote- An operator rated for the gate's weight, length and daily cycles
- Monitored photo eyes and/or edge sensors to UL 325
- Gate construction checked against ASTM F2200 (no pinch points, small openings low on the gate)
- Force and limit settings adjusted and tested
- Battery backup or manual release so you're never locked in or out
- Wiring in conduit, labelled at the control board
- Remotes, keypad or intercom programmed
- A walkthrough on use and safety
Manual gate converted to automatic
From first look to finished job. Tap a step to see it full size.

The manual gate standing half open, as if just pushed by hand Step 1Before: heavy manual gate opened by hand

New heavy-duty hinges and steel reinforcement plates welded at the pillars Step 2Hinges and posts reinforced

Swing operators on both leaves and photo-eye sensors on the pillars Step 3Operator and photo eyes installed

The gate opening on its own, both leaves partway open Step 4After: gate opening on its own
What makes an automatic gate safe

- 1Photo eyes
Infrared beams across the opening stop and reverse the gate if a car or person breaks them.
- 2Edge sensors
Pressure-sensitive edges on the gate reverse it on contact.
- 3Monitored devices
Since 2016, UL 325 requires the operator to check its safety devices before closing automatically.
- 4Gate construction
ASTM F2200: small openings low on the gate and guarded rollers so hands can't be caught.
- 5Warning signs
Signs on both sides of the gate warn that it moves automatically.
Recent projects
Tap any photo to see it full size.









Before & after


Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.
From first call to finished job
- 1
Free consultation
Call or send the form. We ask a few questions, then visit to measure, check the slope, power and soil, and hear what you want.
- 2
Design & written quote
You get a clear recommendation, a drawing for custom work and a written, itemized quote. No pressure, no surprises.
- 3
Build & install
We fabricate, set posts and footings, hang the gate, install the operator and run wiring in conduit. Most installs take one to two days on site.
- 4
Test, train & support
We test every safety device, show you how to use and release the gate, and stay on call for service and warranty.
What our clients say
Maxim and the entire BayView Automatic Gates team were fantastic to work with. They installed our new automatic driveway gate in Los Gatos, and the quality exceeded our expectations. Maxim was responsive, knowledgeable, and made sure every detail was perfect before the job was completed. The gate looks amazing and works flawlessly. I highly recommend them to anyone looking for a reliable automatic gate company.
I wanted something that looked truly custom and not like a standard automatic gate, and BayView Automatic Gates absolutely delivered. The design came out even better than I expected. The curved top, custom ironwork, and the way the gate follows the existing stone wall completely changed the look of the entrance. I was really impressed with the attention to detail and how everything was made to fit the property. The final result feels like it was made specifically for our home. Very happy with how it turned out.
We just moved into our new home in Menlo Park and the old driveway gate really didn't fit the house. BayView helped us come up with a new one, and wow, what a difference. It turned out even better than we pictured.
Frequently asked questions
Can you automate my existing gate?
Often, yes. The gate has to swing or slide freely by hand, hang level and be rigid enough for an operator. We check hinges or rollers, posts and the frame, and tell you if anything needs work first.
How long does installation take?
Most automations and new installations take one to two days on site. Custom gate fabrication adds time before the install.
What happens in a power outage?
DC operators can run on battery backup for a set number of cycles. Every operator also has a manual release so you can open the gate by hand.
Do you repair automatic gates you didn't install?
Yes. We diagnose and repair swing, slide and cantilever gates and most major operator brands.
Related services

Talk to us about your gate project
From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.
