
Custom wood gates with warmth and staying power
Wood gives your entrance warmth and privacy that metal can't match. We build wood driveway and garden gates on hidden steel frames so they stay square, swing true and can be automated.
- Redwood, cedar and hardwood options
- Steel-framed so they don't sag
- Ready for an operator
Get a free quote
Tell us about your project. We'll call you back to set up a free on-site consultation.
Natural warmth, lasting strength
The trouble with most wood gates is sag: the weight of the boards pulls the leaf out of square, the gate drags, and the latch stops lining up. We solve that by building wood gates on a welded steel frame, then cladding them in the wood you choose.
The result has the look of solid wood with the strength to take an automatic operator. We seal or stain it before it goes up and tell you how to keep it looking good in Bay Area weather.

Wood gate styles we build
Horizontal modern
Tight horizontal boards on a steel frame; clean and contemporary.
Vertical board privacy
Full privacy with a traditional look.
Arched and curved tops
Softer lines that suit Mediterranean and Craftsman homes.
Wood and steel
Wood infill in a black steel frame for a mixed-material look.
Garden and side-yard gates
Pedestrian gates matched to your fence.
Driveway gates
Single, double and sliding wood gates, automated.
Every wood gate gets
A written, itemized quote before any work starts, and a warranty on labor and materials after.
Get a Free Quote- A welded steel inner frame that won't rack or sag
- Rot-resistant wood (redwood, cedar or hardwood)
- Stainless or galvanized fasteners
- Sealer or stain before installation
- Heavy-duty hinges or rollers
- Posts or pillars sized for the weight
Custom wood driveway gate
From first look to finished job. Tap a step to see it full size.

An old sagging wood gate Step 1Before: old sagging wood gate

A bare black steel gate frame on sawhorses in a fabrication shop, fresh welds Step 2Steel frame fabricated

Cedar boards being fitted to the steel frame in the shop Step 3Wood cladding fitted and sealed

The finished horizontal cedar gate installed in the driveway opening Step 4After: finished gate installed
Why wood gates sag, and how we stop it

- 1The problem
A wood leaf's weight pulls it out of square over time.
- 2Steel frame
A welded steel frame inside the cladding keeps the gate square.
- 3Strong posts
Posts set deep in concrete carry the load without leaning.
- 4Right hinges
Hinges rated for the gate's weight, adjustable for fine-tuning.
- 5Sealing
Sealing end grain and faces slows weathering and movement.
Recent projects
Tap any photo to see it full size.








Before & after


Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.
From first call to finished job
- 1
Free consultation
Call or send the form. We ask a few questions, then visit to measure, check the slope, power and soil, and hear what you want.
- 2
Design & written quote
You get a clear recommendation, a drawing for custom work and a written, itemized quote. No pressure, no surprises.
- 3
Build & install
We fabricate, set posts and footings, hang the gate, install the operator and run wiring in conduit. Most installs take one to two days on site.
- 4
Test, train & support
We test every safety device, show you how to use and release the gate, and stay on call for service and warranty.
What our clients say
Maxim and the entire BayView Automatic Gates team were fantastic to work with. They installed our new automatic driveway gate in Los Gatos, and the quality exceeded our expectations. Maxim was responsive, knowledgeable, and made sure every detail was perfect before the job was completed. The gate looks amazing and works flawlessly. I highly recommend them to anyone looking for a reliable automatic gate company.
I wanted something that looked truly custom and not like a standard automatic gate, and BayView Automatic Gates absolutely delivered. The design came out even better than I expected. The curved top, custom ironwork, and the way the gate follows the existing stone wall completely changed the look of the entrance. I was really impressed with the attention to detail and how everything was made to fit the property. The final result feels like it was made specifically for our home. Very happy with how it turned out.
We just moved into our new home in Menlo Park and the old driveway gate really didn't fit the house. BayView helped us come up with a new one, and wow, what a difference. It turned out even better than we pictured.
Frequently asked questions
Are wood gates durable in Bay Area weather?
Yes, with the right wood and care. Redwood and cedar resist rot, and sealing every few years (more often near the coast or in full sun) keeps them looking good.
Can a wood gate be automated?
Yes. Our wood gates are built on steel frames so they stay rigid enough for an operator.
Can I choose between wood and iron gates?
Yes, or combine them. Wood infill in a steel frame gives warmth with strength.
How do I maintain a wood gate?
Clean it, check hinges and latch, and reseal or restain every two to four years depending on sun and moisture.
Related services

Talk to us about your gate project
From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.
