Family-owned CSLB Lic. #1149716 · Insured Serving the whole Bay Area from San Jose
Mon–Fri, 8 am–6 pm Contact@bayviewgates.com
Gate Installation & Repair

Gate stuck? We'll get it moving again

Fast, reliable repairs for automatic, swing, sliding and driveway gates. We find the real cause, fix it with your OK on price, and test the whole system before we leave.

  • Same-day service calls
  • Common parts on the truck
  • Safety tested after every repair
5.0 5-star rated on Google

Get your gate working again

Tell us what your gate is doing. We can usually come out the same day.

What do you need? *

Preview copy: on bayviewgates.com this card runs BayView's live lead form.

No obligationWritten quoteCSLB #1149716
CSLB #1149716Licensed & insuredSame-day service callsRepairs across the Bay AreaWarrantyOn labor and materials 5.05-star rated on Google
Gate Repair & Maintenance

Reliable service, lasting performance

Most gate failures have a short list of causes: a power or battery problem, a misaligned or dirty photo eye, a worn hinge, roller or track, a control board fault, or a gate that's dragging and overloading the motor. We test each one systematically instead of guessing.

Repairs are the start. We'll also tell you what's wearing out, so you can plan for it instead of finding out when the gate won't open on a Monday morning.

Schedule a RepairOr call (408) 912-9677

Photo-eye safety sensor mounted on a concrete pillar beside a slat gate, wiring in flexible conduit
Photo-eye safety sensor, wired in protective conduit
What we fix

Gate repairs we handle every week

Mechanical, electrical and access control repairs on residential and commercial gates.

01

Operators and motors

Control boards, motors, gearboxes, limit switches, capacitors and batteries.

02

Safety devices

Photo eyes out of alignment, failed edge sensors and loop detectors.

03

Hinges, rollers and tracks

Worn hinges, seized rollers, bent or dirty tracks, broken guide rollers.

04

Gate structure

Sagging leaves, broken welds, bent frames and storm or vehicle damage.

05

Remotes and access

Remotes, keypads, intercoms and receivers that no longer open the gate.

06

Latches and locks

Gates that won't latch, maglocks and electric strikes that won't release.

Signs you need a repair

Call us if your gate is

Not sure what you need? Describe the problem when you call and we will tell you what we think is going on.

Schedule a Repair
  • Gate won't open or close, or stops partway
  • Opens or closes by itself
  • Grinding, banging or squealing as it moves
  • Gate drags, sags or won't latch
  • Remote, keypad or intercom stopped opening it
  • Operator beeps, flashes an error or hums without moving
  • Gate reverses for no reason (often a photo-eye problem)
  • Damage from a car, storm or fallen branch
Project walkthrough

Sagging swing gate repaired

From first look to finished job. Tap a step to see it full size.

  1. One leaf sagging and dragging on the concrete, scrape marks
    One leaf sagging and dragging on the concrete, scrape marks
    Step 1

    Before: gate leaf dragging on the driveway

  2. New hinges fitted and the leaf re-hung level, checked with a level
    New hinges fitted and the leaf re-hung level, checked with a level
    Step 2

    Hinges replaced and leaf re-hung

  3. A technician at the open operator cover adjusting the controls
    A technician at the open operator cover adjusting the controls
    Step 3

    Operator limits reset

  4. The gate closed, both leaves level with an even gap
    The gate closed, both leaves level with an even gap
    Step 4

    After: gate level and closing cleanly

Visual guide

Why automatic gates stop working

Why automatic gates stop working
  1. 1
    Power and batteries

    Tripped breakers, failed transformers and dead backup batteries.

  2. 2
    Safety sensors

    Photo eyes knocked out of line, dirty lenses or a failed edge sensor keep the gate from closing.

  3. 3
    Mechanical wear

    Worn hinges, rollers and tracks make the gate drag, and the operator stops on overload.

  4. 4
    Control board

    Power surges, water and insects can damage the board.

  5. 5
    Access devices

    Remote batteries, lost programming or a damaged keypad or intercom.

Our work · Gate Repair & Maintenance

Recent projects

Tap any photo to see it full size.

Solid black double swing gate with two operator arms mounted on the posts over a paver drive
Swing operator arms on a solid double gate
Photo-eye safety sensor mounted on a concrete pillar beside a slat gate, wiring in flexible conduit
Photo-eye safety sensor, wired in protective conduit
Horizontal-slat swing gate opening, with the operator housing on the gate post
Swing gate operator driving a slat gate open
LiftMaster control unit glowing blue on a gray wall beside a gate
LiftMaster control mounted at the gate
Horizontal-slat gate post with a surface-mounted lock housing and conduit
Lock hardware mounted to the gate post, wiring in conduit
Black iron driveway gate beneath tall trees with a house behind
Iron driveway gate under tall trees
Broad concrete driveway leading to black iron gates and a hedge-lined fence
Iron gates set back from the road with room for cars to wait

Before & after

Before: gate leaf scraping the pavement (scrape marks visible)
Dragging gate rehung
After: same gate level with an even gap
Dragging gate rehung
Dragging gate rehungBefore: gate leaf scraping the pavement (scrape marks visible). After: same gate level with an even gap.
Before: bent slide gate after a vehicle hit
Damaged slide gate repaired
After: straightened and rewelded, refinished
Damaged slide gate repaired
Damaged slide gate repairedBefore: bent slide gate after a vehicle hit. After: straightened and rewelded, refinished.

Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.

See the full gallery

How it works

How a repair visit works

  1. 1

    Call or book online

    Tell us what the gate is doing (or not doing), the brand of operator if you know it, and any error lights or beeps.

  2. 2

    On-site diagnosis

    We check power, the control board, safety devices, limits and the gate itself, and explain the cause in plain language.

  3. 3

    Repair with your OK

    You approve the price before we start. We carry common parts for the major brands to fix most problems on the first visit.

  4. 4

    Test & tune-up

    We test the full cycle and safety reversal, adjust force and limits, and tell you about anything that's wearing out.

5-star Google reviews

What our clients say

We had a serious issue with our property gate. They sent a specialist to fix the motor because our company sliding gate is rather heavy. Then he re-greased the whole drive unit and fitted a worn internal gear. It's been running good for the first time in years. Great business help.
Daniel C.Google review
I recently have BayView to service our existing gate opener. I am very pleased with the services. There were some issues after the first fix, but Uriel was very good in the follow ups and did a good job in the after services. I am glad I made the decision to work w him. I will definitely recommend them.
Mei C.Google review
Great experience with BayView Automatic Gates. They installed a new gate motor quickly and professionally. Everything works perfectly, and the installation was clean. Highly recommend!
Enersto A.Google review

5.0 on Google · read our reviewsMore reviews

Common questions

Frequently asked questions

How fast can you come out?

Usually the same day you call. Many repairs are finished on that first visit; bigger ones, like a failed operator or a damaged gate, can take a few days depending on the severity and the parts. If your gate is stuck open or closed, tell us when you call.

Do you repair all brands?

We repair most major brands, including LiftMaster, DoorKing, FAAC, Viking, Eagle, Elite and others. If an old operator is discontinued and parts aren't available, we'll tell you before you spend money on it.

My gate keeps reversing. What's wrong?

Most often a photo eye is misaligned, dirty or blocked, or the gate is dragging and the operator senses an obstruction. Both are quick to check.

Do you offer maintenance plans?

Yes. Regular maintenance (lubrication, adjustments, safety tests and battery checks) prevents most breakdowns. Ask us about a schedule for your home, HOA or business.

All FAQs

Gate giving you trouble?

Call or send a request and we'll get your gate working again.

Call Schedule a Repair