
Driveway gates that look right and work every time
Security, privacy and curb appeal in one: we design, build and automate driveway gates for Bay Area homes, then wire in the remotes, keypads and intercoms you'll use every day.
- Swing, sliding and cantilever designs
- Galvanized, powder-coated steel or wood
- Most installs done in 1–2 days on site
Get a free quote
Tell us about your project. We'll call you back to set up a free on-site consultation.
Strong, stylish and made to last
Your driveway gate is the first thing visitors see and the thing you'll use every single day, so it has to look good and work without fuss. We start with your driveway: its width, slope, setback from the street and where power can come from. Then we design a gate that fits it, in galvanized metal, wood, iron, aluminum or composite.
Every gate is built to be automated: a rigid frame that won't rack, hinges or rollers rated for its weight, and room for the operator, photo eyes and intercom pedestal so they look like part of the design, not an afterthought.

Solid spear-top driveway gates closing
Filmed on a BayView job in the South Bay, straight from the phone of the crew that installed it.
Find the right gate for your driveway
The best gate depends on how much room you have, how steep the driveway is and how you want it to look.
Swing gates
Single or double leaves that swing inward. Classic, and ideal for level driveways with space behind the gate.
Sliding gates
Roll along a track set in the driveway. A good fit when there's no room for leaves to swing.
Cantilever gates
Slide on rollers mounted to posts, with nothing in the driveway. Great for gravel, slopes and uneven surfaces.
Modern horizontal slat
Clean lines and adjustable privacy; pairs well with contemporary homes and concrete or stone pillars.
Ornamental iron
Scrollwork, arched tops and finials for traditional and estate homes.
Solid privacy panels
Wood, composite or steel panels that block the view of the house from the street.
Every driveway gate installation includes
A written, itemized quote before any work starts, and a warranty on labor and materials after.
Get a Free Quote- Site visit to measure the opening, slope and setback
- Design drawing and a written, itemized quote
- Posts, footings or pillars sized for the gate
- Gate fabrication with galvanized, powder-coated steel or your chosen material
- Operator sized to the gate's weight and daily use
- Photo eyes and safety devices set up to UL 325
- Remotes, keypad or intercom wired to the operator
- Walkthrough on daily use and manual release
New automatic driveway gate, start to finish
From first look to finished job. Tap a step to see it full size.

The driveway open with no gate Step 1Before: open driveway with no gate

New steel posts set in concrete footings at each side, conduit run across the drive Step 2Posts and footings set, conduit run

A black horizontal-slat slide gate set on its track, the operator on a concrete pad Step 3Gate hung and operator mounted

The finished slide gate closed across the driveway Step 4After: finished gate closed

An intercom pedestal at the curb and a photo-eye sensor on the gate post Step 5Detail: intercom pedestal and photo eye
Planning a driveway gate: 5 things to measure

- 1Opening width
Sets the gate size and whether one leaf or two makes sense.
- 2Slope
Uphill drives can block inward-swinging leaves; sliding or cantilever gates avoid the problem.
- 3Setback from the street
Leave room for a car to wait off the road while the gate opens.
- 4Space beside or behind
Swing gates need room to open; sliding gates need room to park.
- 5Power and wiring
Plan the power run and low-voltage wiring for intercom and keypad before paving.
Recent projects
Tap any photo to see it full size.












Before & after




Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.
From first call to finished job
- 1
Free consultation
Call or send the form. We ask a few questions, then visit to measure, check the slope, power and soil, and hear what you want.
- 2
Design & written quote
You get a clear recommendation, a drawing for custom work and a written, itemized quote. No pressure, no surprises.
- 3
Build & install
We fabricate, set posts and footings, hang the gate, install the operator and run wiring in conduit. Most installs take one to two days on site.
- 4
Test, train & support
We test every safety device, show you how to use and release the gate, and stay on call for service and warranty.
What our clients say
Maxim and the entire BayView Automatic Gates team were fantastic to work with. They installed our new automatic driveway gate in Los Gatos, and the quality exceeded our expectations. Maxim was responsive, knowledgeable, and made sure every detail was perfect before the job was completed. The gate looks amazing and works flawlessly. I highly recommend them to anyone looking for a reliable automatic gate company.
I wanted something that looked truly custom and not like a standard automatic gate, and BayView Automatic Gates absolutely delivered. The design came out even better than I expected. The curved top, custom ironwork, and the way the gate follows the existing stone wall completely changed the look of the entrance. I was really impressed with the attention to detail and how everything was made to fit the property. The final result feels like it was made specifically for our home. Very happy with how it turned out.
We just moved into our new home in Menlo Park and the old driveway gate really didn't fit the house. BayView helped us come up with a new one, and wow, what a difference. It turned out even better than we pictured.
Frequently asked questions
How long does a driveway gate installation take?
Most installations take one to two days on site once the gate has been fabricated. We schedule concrete and any permit inspections up front and give you the full timeline with your quote.
Do I need a permit for a driveway gate?
It depends on your city, the gate's height and how close it is to the street. Many Bay Area cities have rules on gate height and setback. We'll check your city's requirements and handle permits where they're needed.
How far back from the street should the gate be?
Ideally far enough that a car can pull fully off the road while the gate opens. Some cities set a minimum. We'll advise on your site.
Can a driveway gate work on a steep driveway?
Yes. Sliding and cantilever gates usually handle slopes better than swing gates; uphill swing gates can be built to open outward or to a raked angle. We'll recommend what suits your slope.
Related services

Talk to us about your gate project
From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.
