
Gate motor installation and repair
Expert motor service that keeps your gate moving smoothly and quietly every day, from a new motor sized for your gate to a fast repair on the one you have.
- Swing and slide gate motors
- Control boards, gearboxes, batteries
- Upgrades to quiet DC motors
Get your gate working again
Tell us what your gate is doing. We can usually come out the same day.
Reliable motors, professional service
A gate motor that's struggling usually tells you: it slows down, hums, stops partway or trips its overload. Sometimes the motor itself is failing, but often it's working too hard because the gate is dragging or the motor was undersized from the start. We check the gate before condemning the motor.
When a motor does need replacing, we size the new one to your gate's weight, length and how often it runs, and use heavy-duty, weather-resistant units built for the job.

From a quick fix to a full upgrade
Motor diagnosis
We test the motor, capacitor, gearbox, limits and control board to find the actual fault.
Motor and board repair
Replacement motors, capacitors, gearboxes, encoders and control boards.
Battery replacement
Backup batteries typically need replacing every few years; we test and swap them.
Motor replacement
A new operator sized correctly, reusing good wiring and accessories where possible.
AC to DC upgrades
Quieter, soft-start DC motors with battery backup.
Tune-ups
Lubrication, force and limit adjustment and safety testing.
Call us if your gate motor
Not sure what you need? Describe the problem when you call and we will tell you what we think is going on.
Schedule a Repair- Hums or clicks but the gate doesn't move
- Runs slower than it used to
- Stops partway and reverses
- Grinds, clunks or squeals
- Only works after a reset
- Won't run on battery during an outage
Worn-out gate motor replaced
From first look to finished job. Tap a step to see it full size.

An old, rusted operator on the pad Step 1Before: old rusted operator on its pad

The pad empty, the old unit removed, wires coiled and capped Step 2Old unit removed, wiring checked

A new operator bolted to the pad with its cover off, wiring connected Step 3New operator mounted and wired

The finished install with the cover on, area swept Step 4After: finished install with cover on
Inside a gate operator

- 1Motor
AC or DC; DC motors start and stop softly and run on battery.
- 2Gearbox
Reduces speed and adds torque to move a heavy gate.
- 3Control board
Takes signals from remotes, keypads and safety devices and runs the motor.
- 4Limits
Tell the operator where fully open and fully closed are.
- 5Battery backup
Keeps the gate running for a set number of cycles in an outage.
Recent projects
Tap any photo to see it full size.






Before & after


Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.
How a repair visit works
- 1
Call or book online
Tell us what the gate is doing (or not doing), the brand of operator if you know it, and any error lights or beeps.
- 2
On-site diagnosis
We check power, the control board, safety devices, limits and the gate itself, and explain the cause in plain language.
- 3
Repair with your OK
You approve the price before we start. We carry common parts for the major brands to fix most problems on the first visit.
- 4
Test & tune-up
We test the full cycle and safety reversal, adjust force and limits, and tell you about anything that's wearing out.
What our clients say
We had a serious issue with our property gate. They sent a specialist to fix the motor because our company sliding gate is rather heavy. Then he re-greased the whole drive unit and fitted a worn internal gear. It's been running good for the first time in years. Great business help.
I recently have BayView to service our existing gate opener. I am very pleased with the services. There were some issues after the first fix, but Uriel was very good in the follow ups and did a good job in the after services. I am glad I made the decision to work w him. I will definitely recommend them.
Great experience with BayView Automatic Gates. They installed a new gate motor quickly and professionally. Everything works perfectly, and the installation was clean. Highly recommend!
Frequently asked questions
Should I repair or replace my gate motor?
If the motor is a current model and the fault is a part (capacitor, board, battery, gearbox), repair usually makes sense. If it's old, discontinued or undersized for the gate, replacement is often cheaper over time. We'll give you both options.
How long does a gate motor last?
That depends on the brand, the gate's weight and how often it runs. A correctly sized motor on a free-moving gate lasts much longer than one that's overloaded.
Can you replace just the motor and keep my remotes?
Often, yes. Many receivers and remotes can be reused or reprogrammed. We'll tell you what's compatible.
Do gate motors come with a warranty?
Yes. New operators carry the manufacturer's warranty, and our labor is covered by our own warranty.
Related services

Gate giving you trouble?
Call or send a request and we'll get your gate working again.
