Family-owned CSLB Lic. #1149716 · Insured Serving the whole Bay Area from San Jose
Mon–Fri, 8 am–6 pm Contact@bayviewgates.com
Access Control Systems

Gate safety upgrades for peace of mind

An automatic gate is a heavy moving machine. Safety devices make sure it stops for people, pets and cars, and that emergency crews can get through.

  • Photo eyes and edge sensors
  • Warning lights, signs and roller guards
  • Fire department access
5.0 5-star rated on Google

Get a free quote

Tell us about your project. We'll call you back to set up a free on-site consultation.

What do you need? *

Preview copy: on bayviewgates.com this card runs BayView's live lead form.

No obligationWritten quoteCSLB #1149716
CSLB #1149716Licensed & insuredSame-day service callsRepairs across the Bay AreaWarrantyOn labor and materials 5.05-star rated on Google
Gate Safety Devices

Extra protection, everyday peace of mind

Our gate safety devices keep automatic gates safe and reliable. With sensors, edge guards, warning lights and stop features, they prevent accidents and keep older gates in line with current standards: UL 325 for operators and ASTM F2200 for the gate itself.

We'll inspect your gate, show you its entrapment zones, and recommend the devices and changes that make it safe, from photo eyes to roller guards and mesh over openings low on the gate.

Get a Free QuoteOr call (408) 912-9677

Photo-eye safety sensor mounted on a concrete pillar beside a slat gate, wiring in flexible conduit
Photo-eye safety sensor, wired in protective conduit
Upgrades

Safety upgrades we install

01

Photo eyes and edge sensors

Monitored entrapment protection.

02

Warning lights and beepers

Signal that the gate is about to move.

03

Warning signs

Required on both sides of automatic gates.

04

Roller and gear guards

Cover pinch points on sliding gates.

05

Mesh on openings

Close large openings low on the gate.

06

Fire department access

Key switches or siren sensors where your fire code requires them.

Safety inspection

Our safety inspection checks

A written, itemized quote before any work starts, and a warranty on labor and materials after.

Get a Free Quote
  • Entrapment protection on every zone
  • Reversal and force settings
  • Pinch points, rollers and openings
  • Warning signs and lights
  • Manual release
  • Emergency access
Visual guide

Automatic gate safety checklist

Automatic gate safety checklist
  1. 1
    Entrapment protection

    Monitored photo eyes and/or edge sensors on every zone.

  2. 2
    Gate construction

    Small openings low on the gate and guarded rollers (ASTM F2200).

  3. 3
    Settings

    Force and reversal tested regularly.

  4. 4
    Signs

    Warning signs on both sides.

  5. 5
    Emergency

    Manual release and fire department access.

Our work · Gate Safety Devices

Recent projects

Tap any photo to see it full size.

Photo-eye safety sensor mounted on a concrete pillar beside a slat gate, wiring in flexible conduit
Photo-eye safety sensor, wired in protective conduit
Horizontal-slat gate post with a surface-mounted lock housing and conduit
Lock hardware mounted to the gate post, wiring in conduit
Horizontal-slat swing gate opening, with the operator housing on the gate post
Swing gate operator driving a slat gate open
A black slide gate on a commercial driveway with retroreflective photo-eye sensors on both posts, a rubber safety edge on the gate's leading edge, wiring in gray conduit
Black slide gate on a commercial driveway

Before & after

Before: gate with exposed rollers and no sensors
Older gate brought up to current safety standards
After: roller guards, mesh, photo eyes and signs
Older gate brought up to current safety standards
Older gate brought up to current safety standardsBefore: gate with exposed rollers and no sensors. After: roller guards, mesh, photo eyes and signs.

Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.

See the full gallery

How it works

From first call to finished job

  1. 1

    Free consultation

    Call or send the form. We ask a few questions, then visit to measure, check the slope, power and soil, and hear what you want.

  2. 2

    Design & written quote

    You get a clear recommendation, a drawing for custom work and a written, itemized quote. No pressure, no surprises.

  3. 3

    Build & install

    We fabricate, set posts and footings, hang the gate, install the operator and run wiring in conduit. Most installs take one to two days on site.

  4. 4

    Test, train & support

    We test every safety device, show you how to use and release the gate, and stay on call for service and warranty.

5-star Google reviews

What our clients say

Excellent work syncing our residential gate and our side pedestrian gate to the same central master intercom system. The convenience of managing both access points from a single touch panel in the kitchen is life-changing. Great design team.
Penelope T.Google review
We needed an automated secure entrance for our private school campus. They installed a heavy-duty dual swing gate system paired with an authorized-personnel intercom system. They prioritized safety loops to ensure children are completely safe around the gate area.
Jayden R.Google review
Maxim and the entire BayView Automatic Gates team were fantastic to work with. They installed our new automatic driveway gate in Los Gatos, and the quality exceeded our expectations. Maxim was responsive, knowledgeable, and made sure every detail was perfect before the job was completed. The gate looks amazing and works flawlessly. I highly recommend them to anyone looking for a reliable automatic gate company.
Elad L. · Los GatosGoogle review

5.0 on Google · read our reviewsMore reviews

Common questions

Frequently asked questions

Is my older gate safe?

Many older gates predate current standards. We'll inspect it and recommend upgrades.

What is UL 325?

The safety standard for gate operators. It covers entrapment protection, monitoring of safety devices and usage classes.

Do I need fire department access?

Many Bay Area jurisdictions require a fire department key switch or siren sensor on automatic gates across access roads. We'll check your local requirement.

How often should safety devices be tested?

Monthly by you (a simple reversal test) and at every maintenance visit by us.

All FAQs

Talk to us about your gate project

From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.

Call Get a Free Quote