Family-owned CSLB Lic. #1149716 · Insured Serving the whole Bay Area from San Jose
Mon–Fri, 8 am–6 pm Contact@bayviewgates.com
Fence Installation & Repair

Iron fences that look classic and stay rust-free

Strong, timeless fencing with an open view: galvanized and powder-coated steel pickets that follow your slopes and match your gates.

  • Galvanized and powder-coated
  • Follows slopes and curves
  • Matching driveway and pedestrian gates
5.0 5-star rated on Google

Get a free quote

Tell us about your project. We'll call you back to set up a free on-site consultation.

What do you need? *

Preview copy: on bayviewgates.com this card runs BayView's live lead form.

No obligationWritten quoteCSLB #1149716
CSLB #1149716Licensed & insuredSame-day service callsRepairs across the Bay AreaWarrantyOn labor and materials 5.05-star rated on Google
Iron Fence

Built tough, engineered to last

Iron fencing gives security without blocking the view, which is why it's a favorite on hillside lots and estate frontages. Like our gates, our iron fences are fabricated steel, galvanized before powder coating so the finish doesn't rust at the welds.

We install them on posts set in concrete or core-drilled into existing walls and curbs, racked to follow slopes or stepped where the ground drops.

Get a Free QuoteOr call (408) 912-9677

Black iron fence running across a hillside lot below a house
Iron fence along a hillside property line
Styles

Iron fence styles

01

Flat-top picket

Clean and modern.

02

Spear-top

Traditional and harder to climb.

03

Ornamental

Rings, scrolls and finials to match an ornamental gate.

04

On walls

Iron panels set on brick, stone or concrete walls.

05

Pool fencing

Panels and self-closing gates for pool barriers.

06

Commercial security

Taller, heavier pickets for business frontages.

Included

Every iron fence includes

A written, itemized quote before any work starts, and a warranty on labor and materials after.

Get a Free Quote
  • Galvanized steel panels and posts
  • Powder-coated finish
  • Posts set in concrete or core-drilled into walls
  • Racking or stepping to follow the grade
  • Matching gates
  • Warranty on labor and materials
Visual guide

Iron fence anatomy

Iron fence anatomy
  1. 1
    Posts

    Set in concrete or core-drilled into a wall or curb.

  2. 2
    Rails

    Top and bottom rails hold the pickets and carry the panel.

  3. 3
    Pickets

    Spacing set for safety and security.

  4. 4
    Finials and caps

    Decorative or security tops.

  5. 5
    Finish

    Galvanizing plus powder coat.

Our work · Iron Fence

Recent projects

Tap any photo to see it full size.

White arched double driveway gate with an X-braced lower panel, set into a black picket fence under tall trees
White arched gate with a matching picket fence line
Black vertical-picket sliding gate at a modern home with white stucco walls and Italian cypress
Vertical-picket sliding gate
Spear-top black iron fence following a dry hillside slope
Spear-top iron fence following the slope
Black iron fence running across a hillside lot below a house
Iron fence along a hillside property line
Black iron fence on a low curb running through a grove of oaks
Iron fence on a concrete curb through the oaks
Black iron fence lining a curved driveway under mature oaks
Iron fence lining a curved driveway
Red brick wall topped with ornamental iron fence panels behind round boxwood shrubs
Iron fence panels set into a brick wall
Stepped black iron fence running up a driveway toward a horizontal-slat gate, beside a redwood
Stepped iron fence leading to a slat entry gate

Before & after

Before: chain link along a driveway
Chain link replaced with iron fencing
After: black iron picket fence
Chain link replaced with iron fencing
Chain link replaced with iron fencingBefore: chain link along a driveway. After: black iron picket fence.

Photos marked “Representative image” are stock photos, and images with a small “i” are representative illustrations of this kind of work; all others show BayView projects.

See the full gallery

How it works

From first call to finished job

  1. 1

    Free consultation

    Call or send the form. We ask a few questions, then visit to measure, check the slope, power and soil, and hear what you want.

  2. 2

    Design & written quote

    You get a clear recommendation, a drawing for custom work and a written, itemized quote. No pressure, no surprises.

  3. 3

    Build & install

    We fabricate, set posts and footings, hang the gate, install the operator and run wiring in conduit. Most installs take one to two days on site.

  4. 4

    Test, train & support

    We test every safety device, show you how to use and release the gate, and stay on call for service and warranty.

5-star Google reviews

What our clients say

We highly recommend working with BayView Automatic Gates! It was a pleasure working with Uriel! He was very accommodating with our special requests for custom-made fence gates, ensuring we received the privacy we requested. His team worked diligently every day to complete the job, making sure everything fit properly and was installed correctly. We are extremely pleased with the outcome!
Carina R.Google review
Maxim and the entire BayView Automatic Gates team were fantastic to work with. They installed our new automatic driveway gate in Los Gatos, and the quality exceeded our expectations. Maxim was responsive, knowledgeable, and made sure every detail was perfect before the job was completed. The gate looks amazing and works flawlessly. I highly recommend them to anyone looking for a reliable automatic gate company.
Elad L. · Los GatosGoogle review
I wanted something that looked truly custom and not like a standard automatic gate, and BayView Automatic Gates absolutely delivered. The design came out even better than I expected. The curved top, custom ironwork, and the way the gate follows the existing stone wall completely changed the look of the entrance. I was really impressed with the attention to detail and how everything was made to fit the property. The final result feels like it was made specifically for our home. Very happy with how it turned out.
Israel B.Google review

5.0 on Google · read our reviewsMore reviews

Common questions

Frequently asked questions

Does an iron fence need painting?

Not if it's galvanized and powder-coated. Rinse it occasionally and touch up any chips.

Can an iron fence follow a steep slope?

Yes. Panels can be racked to follow the grade or stepped where it's too steep.

Can iron fencing go on top of a wall?

Yes. We core-drill posts into brick, stone or concrete walls.

Is iron fencing good for pools?

Yes, with the right picket spacing, height and self-closing, self-latching gates.

All FAQs

Talk to us about your gate project

From new installations to reliable repairs, we provide trusted solutions across the Bay Area. Get a free, no-pressure quote.

Call Get a Free Quote